80
Midian Programming
M2259-00-200-812
Encrypted Radio Programming and Service Manual
Copyright TEL
Configuration
The diagram below illustrates the programming setup.
Use the cable provided with the Midian Programmer to connect the programmer to the pads on
the flex circuit. See diagrams on the following pages for correct connection points.
7.2.1
TOP radio - Midian KL3 cable connection points
To connect the Midian programming cable according to the diagram below, first solder a short
length of wire to the indicated pads, then attach the cable clip to it.
3
6
9
PQRS
WXYZ
STAT
Ch
Fn
α
T2000
II
T2020II
Power Supply
T2000
Computer for
programming
Data read / write
Standard RS232
serial cable
T2000 or Tait Orca radio
(opened to allow
access to flex pads
while operating)
Midian KL3
Programmer
Cable provided with
Programmer connects
to pads on flex
Flex fitted to
TOP or T2000
355
355
Encryption Module
(data stored in
memory)
Link 5, right pad
Connect
(yellow) clip here
program out
P11
Connect
(green) clip here
program in
