27
Installing an accessory
Warning
Use only IS-approved accessories with IS radios. For an
up-to-date list of FM-approved accessories, go to the Tait website
or contact your nearest Tait office. For detailed information about
IS radios and how to identify them, see
"Intrinsically Safe radios"
on page 16
.
Accessories plug into the radio’s accessory connector. The
accessory connector is protected by a cover, which needs to be
removed before an accessory can be installed.
Notice
The accessory cover protects the accessory connector
from electrostatic discharge. Keep the cover in place unless the
connector is in use.
To remove the accessory cover and install an accessory:
1
Use a coin or other blunt object to
loosen the screw that secures the
accessory cover to the radio.
2
Remove the accessory cover and
store it in a safe place.
3
Plug the accessory into the
accessory connector.
4
Tighten the screw.
Summary of Contents for TP8110
Page 1: ...TP8110 Conventional Portable Radios User s Guide MPC 00026 07 Issue 7 January 2013 ...
Page 71: ...72 Tait general software licence agreement ...
Page 72: ......
Page 73: ......