1. Press
Menu
and select
Preset calls
.
2. In the
Preset calls
menu, scroll through the list of calls until the required call appears, then press
Send
.
While the call is being setup, it can be canceled by pressing
Clear
.
Dialing a preset call
This feature is only available for radios with alphanumeric keys.
It may be possible to dial preset calls, if preset calls are programmed for your radio and you know the number asso-
ciated with the preset call.
1. Dial
p
, where
p
is the number of the preset call.
If your preset call number is the same as a call to another radio, then you need to dial a leading
0
. For example,
dial
23#
to call radio 23 and dial
023#
for preset call number 23.
2. Press
Send
or the
#
or PTT key.
While the call is being setup, it can be canceled by pressing
Cancel
.
About Trunked Zones and Workgroups
Trunked zones and workgroups are used to manage the calls on the trunked system. Zones, if used, typically define
geographic areas (towns, suburbs or counties), or branches of an organization. Workgroups span multiple zones, and
typically define functions, work areas or job roles.
When the radio belongs to a workgroup, it is said to be ‘subscribed’, and users receive all calls directed to that group
of users. A group’s members are dynamic, in that a group only contains radios that are currently registered on the sys-
tem and subscribed to the same group.
The radio may be programmed to use different names for a ‘zone’ and ‘workgroup’. For example, ‘dis-
trict’ or ‘area’ may be used in place of zone, and ‘role’ or ‘group’ may be used in place of workgroup.
Selecting a zone
1. Press
Menu
and select
Set zone
.
2. In the
Set zone
menu, scroll through the list of zones until the desired zone appears.
3. Press
Select
.
4. Check that the network icon
appears on the display.
73
Tait International Ltd December 2019
