Using the Main menu
1. Press
Menu
and select
Go to homegroup
.
2. Press
Select
, and the radio now shows the homegroup in the default display.
Using function keys
Users may be able to use function keys to go to their homegroup or to toggle between the homegroup, and the
currently selected zone and workgroup.
• Press the function key programmed to go to the homegroup.
The radio now shows the homegroup on the default display.
• Press the function key programmed to toggle between the homegroup and the currently selected zone and
workgroup.
The radio now shows the homegroup on the default display, along with the homegroup icon .
The homegroup icon only appears if using a function key to toggle between the homegroup and the cur-
rently selected zone and workgroup.
Scanning workgroups
The ‘My Workgroups’ list comprises the current workgroup, the homegroup, and other programmed groups. When
scanning is active, the radio will receive activity from any subscribed groups in the My Workgroups list.
To activate scanning:
1. Press
Menu
and select
Scanning
.
2. Scroll to
On
(or
Off
) and press
Select
.
About Emergency Operation
In an emergency, users may be able to summon help by sending an emergency call. After making the call, the radio
may be programmed to enter emergency mode. While emergency mode is active, the radio may cycle between
receive and transmit, so that the dispatcher or the called party can hear any activity near the radio.
On most networks, an emergency call takes precedence over other call types, and existing calls are cleared down so
that the emergency call can proceed.
To make an emergency call from a radio, users may be able to either:
• use a function key programmed for emergency mode
• make an emergency call using
Making a Call Using the Address Book
)
)
• dial the emergency call using the alphanumeric keys
75
Tait International Ltd December 2019
