■ • •
■ r,1,■,.,.■■•- -■ I
I-'-"■■ I IILILILl'I
( 1) Loosen the thumb screws and pull the
Connecting arm towards you by lifting
arm up slightly
Then. take off the Connecting Arm.
(2) Alter disconnecting the KR carriage
from the KH carriage. move the KR
carriage to right end of the needle bed
by keeping off the front foot from the
needle bed as shown in the figure
(3) Loosen the screws and take off the KH
clamps
(4) Hold up the lower side of the ribber a
little and pull 1t toward you
You can take 11 off
• Leave the KR Setting plates
When you use the Single Bed Colour
Changer. take oft the left KR Setting
plate
-8-