(6) Fine knitting bar
The fine knitting bar 1s used only for
knitting the thinner yarn at the tension
number O - 3.
Insert the bar from the end of the KH
needle bed as shown in the photo
graph and illustration.
The Fine knitting bar can help the
stitches to slip out of the hooks of
needles securely.
(7) Cast-on comb
Cast-on comb is used for casting-on
the first stitches which 1s the selvedge
of the knitting. Choose long or small
comb depending on the knitting width.
• Also you can use the Short cast-on
comb as a weight hanger. as detailed
below
1) Hold the Short cast-on comb with
points facing you Lift the presser
bar up, then pass the knitting work
between the presser bar and comb
from back side
2) Pull the end of knitting work down
0). and turn the c ast-on comb(D as
shown 1n the F,g_ ( 1) so that the
cast-on comb may buckle on the
kn1t11ng work. Then hang the weights
on the cast-on comb
3) When you reset the cast-on comb.
simply pull the knitting work up so
that the cast-on comb may go up
Then pull the knitting work down to
lock up
-17-
11)
(2)
(3)
,,1111111\lll�
Knitting
II
work