Ill. �t: I IINl:i Ut' YUUH HltSHt:H I U I Ht: !\.NII I t:ti
( 1) Secure the knitter onto a flat table
using the Table clamps provided as
an accessory for the ribber.
1) Insert the top of the thumb screws
of the table clamps onto the holes
on the back of the knitter.
2) Fasten the screws.
3) Secure the table clamps onto the
table to tilt the knitter.
(2) Put the KR Setting Plates to the
knitter.
1) Remove the thumb screws from the
KR Setting Plates.
Thumb screw
Thumb screw
-3-
