NEOS3000A-3G COMBINED Ver. 1
Page: 2/12
QUICK GUIDE
For NEOS3000A-3G Series
Please read below of our instructions :
1.
Prepare one sim card and one standard telephone
Disable this “enter pin code” . If you have enable this functions, please
disable this function before insert sim card into our NEOS3000A-3G.
Our NEOS3000A-3G can't do it if it is exist, please try to disable this
function from your handset mobile phone . (Warning: Disconnect the
power before insert SIM card)
2.
Installation
2-1 : Open sim card cover by removing
2-2 : Open the sim card holder and gently insert your sim card in a slot card of
the sim card holder
2-3: Close the sim card harder.
Hint: Make sure the sim card is aligned properly with the directional arrow
the holder .
3.
Connect the Antenna
Connect the antenna to the NEOS3000A-3G and tightened the antenna (Do not
over-tighten the antenna)
4.
connect to AC power
Plug the power into the AC power outlet, connect the AC/DC adapter to the DC
Jack of the NEOS3000A-3G.
5.
Check the cellular Signal Strength
Put this Antenna to the right Position and move NEOS3000A-3G until you find
the best signal possible see the LED status indicators section of this Manual.
6.
Attach telephone
7-1.Plug on the end of a stand phone cord into a phone
7-2.Connect the other end the phone cord on the side of the NEOS3000A-3G
(phone port)
