TAIYO ELECTRIC IND.CO.,LTD.
10
TAIYO ELECTRIC IND.CO.,LTD.
3
Rules for Safe Operation
1. KNOW YOUR SOLDERING STATION.
Do not attempt to operate this soldering station until you have read thoroughly and
understood completely all instructions, safety, rules, etc. contained in this manual.
Failure to comply may result in accidents involving fire or serious personal injury.
2. DO NOT USE IN DANGEROUS ENVIRONMENTS.
Do not use the soldering station in damp or wet locations or expose it to external envi-
ronmental conditions, particularly rain. Never use it in an explosive atmosphere. The
heat from the heater can ignite fumes. Be sure that the work area is properly lit and
well ventilated.
3. KEEP CHILDREN AND BYSTANDERS AWAY FROM THE SOLDERING STATION.
Do not let bystanders touch the soldering station. All bystanders should be kept a safe
distance from the work area.
4. PROPERLY STORE THE SOLDERING STATION WHEN NOT IN USE.
When not in use, the soldering station should be stored in a dry and locked place.
Keep out of the reach of children.
5. USE FOR THE RIGHT JOB.
This soldering station is an electrical tool used to solder parts and melt solder. Do not
use the soldering station for any other purpose. For example: The soldering station
should never be used to warm water or other liquids.
6. WEAR PROPER APPAREL, SAFETY GLASSES, GLOVES AND MASK.
Do not wear loose clothing (such as a necktie). Tie up long hair. Clothing or hair can
burn on contact with the tip or surrounding heated parts.
7. CONNECT TO THE SPECIFIED AC POWER SUPPLY.
The power voltage for this soldering station is indicated at the back of the con-
trol unit. Never plug the soldering station into any other voltage.
8. DO NOT ABUSE THE POWER CORD AND INSPECT IT PERIODICALLY.
Never pull the power cord to disconnect it from the receptacle. Keep the power cord
away from heat, oil and sharp edges. If it is damaged, contact the nearest distributor
for a replacement.
WARNING
Do not operate the soldering station until you have read
and understood the whole manual and safety instructions.
RX-822AS英文取説_2015_03.indd 10
2015/03/20 14:45