taiyo Goot RX-822AS Operation Manual Download | Manualshive

Page: 30 / 36

background image

30

TAIYO ELECTRIC IND.CO.,LTD.

30

TAIYO ELECTRIC IND.CO.,LTD.

Recommended temperature
The lead-free soldering iron should be set at a low temperature. This slows down
carbonization. Lead-free soldering irons have excellent heat recovery. Reducing the
temperature will not affect the work being carried out. However even at lower tempera-
tures, flux still carbonizes.

Cleaning tips
During and after use, rub the tip over the sponge or in and out of the tip cleaner metal
shavings while hot. This will remove the blackened oxidized particles from the tip.

Applying solder
Be careful to keep the solder only in contact with the solder-coated area of the tip.

Using the soldering iron stand
The first time you plug in the soldering station after purchase, or when resting the iron
in the stand during use, leave a coating of solder on the solder-coated area of the tip
and place it into the soldering iron stand. Only a thin layer of solder is necessary. The
tin surface of a lead-free soldering iron oxidizes easily. Coating it with solder reduces
oxidation levels.
Oxidation starts as soon as the tool is plugged in and begins to heat. When operation
is completed, tin the tip with solder before turning the power off. This protects the tip
from oxidation when it starts heating up the next time it is in use.

A lead-free soldering iron is more susceptible to oxidation, and it is more difficult to wet the tip
with solder. Flux within the solder adheres to the tip, carbonizes and blackens. This cannot be
stopped. However, if the user follows the instructions for use and maintenance below, the user
will be able to easily wet the tip with solder consistently.

How to use, clean, and maintain the soldering iron

5-5 How to Use, Clean, and Maintain a Lead-Free Soldering Iron

At no time during cleaning allow gasoline, petroleum-based products, or penetrating oils, etc.
to come into contact with the plastic parts. They contain chemicals that can damage, weaken,
or destroy plastics. Remove dirt with a clean cloth.

5-4 Housing Cleaning

RX-822AS英文取説_2015_03.indd 30

2015/03/20 14:45

«
...
28
29
30
31
32
...
»

Summary of Contents for Goot RX-822AS





































Reviews:

No comments

Related manuals for Goot RX-822AS

Brand: ersa Pages: 14

Brand: TOOLCRAFT Pages: 8

Brand: Velleman Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands