7.TROUBLE SHOOTING
Auto mode is not able to
beeping.
1.main power is shut off.
Bad communication
between charging station
and mower.
1. Check the power and
make sure the charger is
connecting well with power
supply and charging
station.
1.The virtual wire fails to
send signals.
2.The virtual wire was
cut off.
1.Check the virtual wire
light on charging station.
wire is
Be sure the virtual
connected to the charging
station well (light in
2. Connect the virtual wire
with wire connectors.
7. TROUBLE SHOOTING
Problem
Alert info
Solutions
Possible reasons
colorless).
Mower stops working
and beeps.
1. Mower is lifted from
ground.
2. Someone or object ride
or sit on the mower.
1. Take the mower to level
ground and restart it.
2. Take the object away
from mower and restart it.
Mower stops working
and beeps.
1. Running wheel strike
1. Cutting height is too low.
2. Blade strikes hard
objects.
3. Mower is trapped in lawn
1. Adjust the cutting height
to suitable height.
2. Clean the lawn and make
sure it is free from hard objects.
3. Clean the lawn where mower
is trapped or restart the mower
in another place.
Mower stops working
and beeps.
hard objects.
2. The mower is trapped
in lawn.
1. Clean the lawn and make
sure it is free from hard objects.
2. Clean the lawn where mower
is trapped or restart the mower
in another place.
- 17 -
Virtual wire was cut off.
Charging station is out of
start,charging station is
Signal light is off.
power.
Auto mode is not able to
beeping.
start,charging station is
Signal light is off.
Lift sensor or pressure sensor
activated.
Current of right running motor
is too large,check it.
Current of left running motor
is too large,check it.
Current of cutting motor is too
large,check it.
