3
Power switch: Power on/ Power off
4
Up / + : there are tree functions for this button.
-select menu, go upward
-select menu, go left
-Select figure, means +
5
Confirm button
-To confirm your choose or enter.
6
Down / -
-select menu, go down
-select menu, go right
- Select figure, means -
5
.
USE
5. Use
IMPORTANT INFORMATION
Operation
with
Auto
Pattern
- Do not leave the machine to operate unattended if you know that there
are pets,
children or people in the vicinity
Operation with Manual Pattern
- Mow only in daylight or in good artificial light.
- Avoid operating the appliance in wet grass.
- Do not operate the appliance when barefoot or wearing open sandals.
- Always wear
substantial footwear and long trousers.
- Always be sure of your footing on slopes.
- Use extreme caution when reversing the appliance towards you.
- Always switch on the mower according to instructions with feet well
away
from the
blade.
5.1 Preparation
- Ensure the correct installation of the virtual wire delineation system as
instructed
- Periodically
inspect
the
area
where
the
appliance
is
to
be
used
and
remove
all
stones
,
sticks, wires, bones, and other foreign
objects
especial
the objects
'
height
is
less
than
6cm.
- Periodically visually
inspect
to
see
that
the
blades
,
blade
bolts and
cutter assembly
are not worn or damaged. Replace worn or damaged.
Read the safety instructions before you start your mower.
Keep your hands and feet away from the rotating blade.
Never put your hands or feet close to or under the body when
the
motors
are
running
.
WARNIN
WA R N I N
-
P28
-
-
P27
-
4.2 Remote control
MOW
1
9
2
3
4
5
6
7
8
4. CONTROL PANEL AND REMOTE CONTROL
10
To stop the mower. Press it, the
mower enters taskstate.
Indicator light.
Go right.
Effected while mower in taskstate.
User has to stop the mower first,
then press it, the mower enters
MANUAL pattern.
Speed down
Effected while mower in taskstate.
User has to stop the mower first,
then press it, the mower enters
AUTO pattern.
Press it during mower is working,
it goes back to charging station.
Go left.
Turn ON/OFF blade.
Speed up.
1
2
3
4
5
6
7
8
9
10
IMPORTANT INFORMATION
These five buttons only effected in MANUAL pattern.
3
33 5
8 9
10