Power is not
fully charged for
operation
The ground
before the
charging station
is not flat.
Short run time,
operates less
time than normal
Mower does not
detect the
charging station
contacts.
Recharge the
mower fully.
Reset the
charging station
in a flat place.
Terrain needs
landscaping
repairs.
Obstacle along
the path
Mower does not
complete the
edge.
Mower drives
but blade will not
mow.
1. On manual
pattern, Mow on
remote control
has be turned
off.
2. The cutting
motor is broken.
Fill in all holes,
cover or exclude
all exposed
roots in order to
smooth the
terrain.
Watch the ful
operation of
edge and
confirm no
obstacle are
present
1. Turn on the
mower button.
2. Send the
mower to
service station
and replace a
new cutting
motor.
7. TROUBLE SHOOTING
Problem
Display
Solutions
Possible reasons
-
P49
-
Confirm the
ground before
the charging
station is leveled
with the
charging station
if necessary fill
area with dirt
and level off.
Relocate the
virtual wire
1. Replace the
blade with a new
one.
2. Stop the robot
in safety
conditions; use
protection
gloves to avoid
the risk of cuts
on hands;
remove the fold
cause from the
blade.
3. Start the robot
in a new place.
1. Damaged
cutting blades
2. Cutting blade
flooded by
residues(tapes,
ropes, plastic
fragments, etc)
3.The start of
the robot
occurred with
obstacles being
too closed (less
than 1m away)
or in presence of
unexpected
obstacles (fallen
branches,
forgotten
objects, etc.)
The robot is very
noisy
Height
difference
between the
charging station
and the lawn
surface at the
entrance to the
charging station.
Virtual wire
incorrectly
placed
Mower reached
the charging
station when its
contacts are
above the
charging station
contacts.
The robot
behaves in an
anomalous
manner around
the flower beds.
7. TROUBLE SHOOTING
Problem
Display
Solutions
Possible reasons
-
P50
-
