2. PRESENTATION
2.2 Function of 2000series
- Lift sensor
There are lift sensors located on each omni-directional wheel. If the
mower was lifted 2cm from the ground in level way, it will stop working
within 2 seconds.
- Tilt sensor
There is tilt sensor installed on the mower too, when the mower was
tilted over 30 degree at any direction, it also will stop working within 2
seconds.
- Ultrasonic sensors
Compare to traditional bumpers, the ultrasonic obstacles is much more
safety. The mower selects a new direction before it bumps people or
obstacles automatically. That means no touch! Don't worry, the mower
will never hit your children and pets. Ultrasonic sensors can be selected,
that means it can be turn on or turn off freely.
- Bump sensors
In front of the mower there equipped with bump sensors that will activate
when the mower strikes solid, fixed object when that object is at least 6cm
in vertical height from the supporting surface of the mower. When the
bump sensor is activated, the mower will stop movement in that direction
and reverse itself away from the obstacle.
- Rain sensors
There are two rain sensors on top cover of mower. The mower will go back
to the charging station automatically when it's raining. Rain sensors can
be selected from control panel or remote control.
Turn on it: the mower will go back to home if it is raining.
Turn off it: the mower will go on mowing when it is raining.
- Human sensor
Touch the handle when the mower is cutting, it will cease function within 2
seconds.
- Wireless controller
To control the operate of mower in manual pattenr.
2. PRESENTATION
- Mowing schedule
Set up one week (From Monday to Sunday, once for each day) cutting
schedule from control panel. The mower is on auto pattern when in
schedule functioned, if it feels is powerless, it will go back to charging
station for recharge automatically, and it will goes on cutting after it
finishes recharge.
- Anti-theft function
User must enter the correct password then the mower can be started.
What's more, the mower can not be turned on without charging station.
- Cutting width:30cm
- Humanistic cutting height selection
3cm-6cm humanistic design.
Easier for user to choose the cutting height. Just screw it!
- Auto recharge system
When the mower is operating it feels powerless, the cutting motor turn off
at once and it will find the virtual wire then go alone it back to charging
station for recharge automatically. (this allows you to keep the charger
connected with the charging station all the time, even after the battery is
fully charged.) On auto pattern, the mower will go on mowing after fully
recharge. But if it is on manual pattern, it will just stay on charging station
after fully recharge.
- Emergency stop switch
There is an emergency stop switch located on the top of mower and red in
color. If you press it in any case during operating, the mower must stop all
movement and stop the rotating of blades immediately. Rotating the
switch to reset it and the mower is in taskstate by entering the correct
password and choose operate pattern to restart it.
- Two cutting modes
There are two cutting modes of the mower, go straight and go circle (high
efficiency). On manual pattern, we can choose the cutting mode from
remote control. On auto pattern, mower selects cutting mode intelligently.
It goes straight if the grass has be cut, and it goes circle if the grass is
long.
-
P10
-
-
P9
-
