Taizhou Tianchen Intelligence & Electrics S520, User Manual

5. USE

5.5 System time setting

1. Select 

 TIME         

and enter it by pressing key    .

    - Press key     or key     to scroll to Year setting.
      press key     to enter Year setting.

2. Select 

 SYSTEM TIME 

and enter it by pressing key    .

3. To set Year.

4. Set Week, Month/Date, Hour/Minute as Step 3. 

    - Press key     or key     to scroll to the correct Year.
      and confirm the setting by pressing key     .

5. Press key     or key     to scroll to SAVE and save the

 setting by pressing key     .

5.6 Schedule time setting

1. Select 

 TIME         

and enter it by pressing key    .

    - Press key     or key     to set Hour/ Minute.

2. Select 

 SCHEDULE TIME 

and enter it by pressing key    .

4. To set START TIME.

      and confirm the settings by pressing key     .

Explanation: 

- If Set AREA 1 with 000 minute, it means Non-cutting in 

3. Select 

 WEEK (

MON,TUE,WED,THU,FRI,SAT,

SUN) 

and enter it by pressing key    .

- Select 

 START TIME 

and enter it by pressing key    .

    - Press key     or key     to set how long should the robot 

5. To set working time in each area.

      and confirm the settings by pressing key 

- Select 

 AREA 1 

and enter it by pressing key    .

The schedule time setting should be used together
 with AREA function. 

P14-5.11 AREA setting.

      works in AREA 1,

    .10minutes for each scrolling.(From 000 to 250minutes).

6. Set 

AREA 2

 and 

AREA 3

 as Step5. 

7. Press key     or key     to scroll to SAVE and save the .

 settings by pressing key     .

 AREA 1.

- If user doesn’t select working in AREA 2. (See

P14- 

). Even user has set a working 

5.11AREA SETTING

 time in AREA 3, robot will not work in AREA 3.

8. Select 

DEL

 to delete the settings.

IMPORTANT INFORMATION

By using 

SCHEDULE

 function, the 

LINE

 must be turn 

on or the robot must be put onto virtual wire. Otherwise,

the robot don’t works under schedule time setting.

5.7 Password setting

1. Select 

 SET         

and enter it by pressing key    .

    - Press key     or key     to scroll to OLD PASSWORD

      press key     to enter it.

2. Select 

 PASSWORD 

and enter it by pressing key    .

4. To input OLD PASSWORD.

    - Press key     or key     to scroll to the correct password.
      and confirm the setting by pressing key     .

6. Press key     or key     to scroll to SAVE and save the

 setting by pressing key     .

3. Initial password: 0000

5. To set NEW PASSWORD as Step 4.

Password function is optional.

SWITCH ON: every time the robot starts,

              user has to input correct password.

SWITCH OFF: user does not need to enter password 

               when starts the mower.

5.8 Address setting

1. Select 

 SET         

and enter it by pressing key    .

2. Select 

ADDRESS 

and enter it by pressing key    .

The robot communicates with charging station. 
There is an 

ADDRESS

 between robot and charging  

station. User has to set the address before using it. 

 
Otherwise the robot can not start working. 

A label

 with 

Address Code pasted on charging station. 

To set the address:

3. Input the Address Code 

Address:XX

Product name: Robot lawn mower 
Model: S520         IP55
Input: 29.4 V        4A
Ouput  29.4 

4A        

:

V

Made in China    

R

O

HS  

Zhejiang Tianchen Intelligence & Technology Co., Ltd 

    as the label pasted at the 
    back of charging station. 

- 13 -

5.9 Initial setting

Restore to factory settings. 

1. Select 

 SET         

and enter it by pressing key    .

2. Select 

INITIAL 

and enter it by pressing key    .

3. Select 

YES /  NO 

and confirm the selection by 

key    .

pressing