Taizhou Tianchen Intelligence & Electrics TC-G158 with lead-acid, User Manual

-

P35

-

Power nearing 
natural end of life

Grass is extremely 
overgrown or very 
wet

2. Check whether the 
charger is well 
connected.

1. Send the mower to 
service station and 
replace the battery 

Cut the grass 
appropriate height.

The batteries can 
not recharged

7. TROUBLE SHOOTING

Problem

Solutions

Possible reasons

-

P36

-

Terrain needs 
landscaping repairs.

Fill in all holes, cover or 
exclude all exposed 
roots in order to smooth 
the terrain.

Mower does not 
complete the edge.

Obstacle along the 
path

Watch the ful operation 
of edge and confirm no 
obstacle are present

Mower drives but 
blade will not mow.

1. On manual pattern, 
Mow on remote 
control has be turned 
off.
2. The cutting motor is 
broken.

1. Turn on the mower 
button.

2. Send the mower to 
service station and 
replace a new cutting 
motor.

Power is not fully 
charged for 
operation

The ground before the 
charging station is not 
flat.

Short run time, 
operates less time 
than normal

Mower does not 
detect the charging 
station contacts.

Recharge the mower 
fully.

Reset the charging 
station in a flat place.

7. TROUBLE SHOOTING

Problem

Solutions

Possible reasons

Confirm the ground 
before the charging 
station is leveled with 
the charging station if 
necessary fill area with 
dirt and level off.

Relocate the virtual 
wire

Height difference 
between the charging 
station and the lawn 
surface at the 
entrance to the 
charging station.

Virtual wire incorrectly 
placed

Mower reached the 
charging station 
when its contacts 
are above the 
charging station 
contacts.

The robot behaves 
in an anomalous 
manner around the 
flower beds.

The robot is very 
noisy

1. Damaged running 
motor

2. Grass too high

1. Get the motor 
repaired or replaced by 
service station
.
2. Increase the cutting 
height or use a normal 
lawn mower.