background image

  1.INTRODUCTION AND SAFETY

This label is pasted on charging
station, please make sure to 
position this side towards lawn
interior. Failure to do may result
 in damage to property or 
persons.   

DANGER! Sharp rotating blades.
Keep hands and feet away. Serious
 injury can occur.

DANGER

3. Charging station symbol.

4. Warning symbol.

Position his side of the charging     
   station towards lawn interior

1.3 Symbols in the User Manual

These symbols can be found in this owner/operating manual. Study them 
carefully so you understand their significance.

A warning box indicates a risk of personal injury exist, especially when the 
stated instructions are not followed.

An information box indicates a risk of material damage exist, especially 
when the stated instructions are not followed. The box is also used where 
there is a risk of user error.

WARNING

xxxxxxxxxxxxxxxxxxxxxxxxx.

IMPORTANT INFORMATION

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.

-

P4

-

-

P3

-

  1.INTRODUCTION AND SAFETY

 1.4 Safety instructions

-  Read the owners/operation manual carefully and follow all the safety   
   and warning instructions.

-  This machine has sharp rotation blades! Never allow the mower to  
   operate unattended; keep bystanders, children and pets away from   
   mower when in operation.

-  Never allow anyone to ride or ait on mower.

-  Never allow anyone or person who is not familiar with the safe operation 
   of the mower to operate the mower.

-  Keep hands and feet away from the cutting blades and other moving   
   parts.
-  Never attempt to service or adjust the mower while it is in operation.

-  Inspect and clear the mowing area of all debris (toys, tree branches, 
   items of clothing, debris' height less than 6cm. etc) before operating the 
   mower.

-  Never raise the mower or attempt to inspect the blades while the mower  
   is operating.

-  Always turn off the power before lifting the mower or attempting any   
   adjustment.

-  When operating the mower in manual mode, maintain a safe distance   
   from behind or around the mower and wear proper foot apparel.

-  Do not operate the mower on slopes greater than 20 degrees or use it in 
   manual operation on slopes where a firm footing is not possible.

-  Do not operate the mower if any safety feature or device is damaged or 
   inoperable.

-  Do not attempt to disable or defeat any safety feature or device.

Summary of Contents for TC-G158 with lead-acid























Reviews: