15
4.5 DISCHARGE CONVEYOR
Lifting and lowering of the discharge
conveyor is performed with the hand
winch handle (23-Figure: 12). When
the desired position is reached, secu-
re it with the chain, so that the weight
of discharge conveyor is distributed
between the wire rope and the
carrying chain. (24 – Figure: 12).
When using and maintaining the
hand winch, follow the
enclosed
manufacturer’s instructions.
The speed of the discharge conveyor
can be adjusted using the speed regu-
lator of the discharge conveyor (K-
Figure: 12).
4.4.3 “START-STOP” SWITCH (RCA 320-2 E)
Electrical system of the wood processor RCA 320-2 E includes, besides the main switch, also the “Start-Stop”
switch (S-Figure: 1). The “Start-Stop” switch is used to turn ON/OFF the electric driving motor, which
powers the cutting chain and whole hydraulic system. Using the red button of the “Start-Stop” switch you can
completely stop the operation of the machine.
Before staring the machine or pushing the “start-stop” switch it is recommended to lift the machine cover, to
allow easier starting of the electric motor (Refer to chapter 3.3).
4.4.4 MAIN SWITCH (RCA 320-2 E)
The wood processor’s main switch (R-Figure: 1b) shuts down the main power supply. Use the main switch when sto-
pping the work for longer periods or leaving the work place. Unauthorized access to the power switch can be prevented
by installing the padlock.
11
B
STOP
STOP
12
23
K
24
