3
Nominal Pulling Power (max)
35 kN
Pulling Power at a Full Drum
18.7 kN
Brake Power
44 kN
Pulling Speed (at 540 rpm - PTO shaft)
(0.63 - 1.19) m/s
Gear Ratio
1 : 7.5
Required Drive Power
(11 - 25) kW
Wire Rope Length - Drum Capacity
8 / 111 m,
9 / 83 m,
10 / 68 m,
11 / 55 m.
Wire Rope Min. Brake Point (F
Smin
)
70 kN
Width
1,220 mm
Length
489 mm
Height without protective net
1,195 mm
Height with protective net
2,000 mm
Transport Height
1,266 mm
Max. Operating Noise
70 dB (A)
Weight
240 kg
1.3. TECHNICAL DATA .
1.2. APPLICATION .
Logging winch is intended for the agriculture use, especially for pulling the wood. The winch is
constructed as a three point connecting piece of the suitable driving machinery (
not stronger
than 40 kW
).
The winch may be used for pulling loads on the ground, only.
This operating instructions also describe proper use and maintenance of the winch. Any other
application of the machine is considered as unintended use and the manufacturer Tajfun does
not take any responsibility for eventual damages caused by such application.
1.4. TYPE PLATE .
a
Year of Manufacture
b
Serial Number
c
Wire Rope Min. Break Point
a
b
c
