20
Chapter 2 Getting Ready to Embroider
2
3.
Hook the upper thread onto the tip of the upper
thread guide (Accessory part), and insert it into
the thread tube.
Continue inserting until the threader comes out from the
thread tube opening that is fixed in the tension base.
4.
Once the upper thread has through the
thread tube opening, thread it as shown in the
illustration to the right.
5.
As illustrated to the right, pass the upper
thread through the thread guide, and then pass
it around the thread breakage detection disk.
An arrow, which shows the direction in which the
upper thread should travel, is imprinted around the
thread breakage detection disk. Follow this arrow
when threading the upper thread.
