49
Chapter 4 Getting the Most Out of the Machine
4
With some designs, the thread color and needle number for each step (order, for each color, in which
sewing is to take place) are already assigned to the design. The following explains the steps you need
to take if you want to carry out embroidery using needle numbers different than those stored within the
design.
The steps below should also be followed when you want to set the appropriate needle numbers for a
design that did not have any steps assigned within it, and then perform embroidery.
Any of the following operations can be inserted between steps:
• Bring frame out
• Pause embroidery
• Repeat step
1.
Tap
on the Home screen.
The Design Load screen is displayed.
2.
Tap the source from which you want to load a design,
and then load the design.
The Needle No. Setting screen is displayed.
"3.2.1 Loading the design to be embroidered", "4.3 Loading
designs from records or favorites", "4.4 Loading a design from
a PC using a LAN cable"
4.6 Editing the steps of a design
If you want to use the color information that is already stored, the procedures explained here are
unnecessary.
If a design that does not have steps assigned within it is
loaded, all of the steps from needle No. 1 to No. 8 are
assigned, in order.
