12
For smoother operation
Allow time for heating after adding purified water.
Turn on the Power Switch 2 minutes or more before
starting in order to allow the steamer to warm up.
Usage
Setting the Main Unit
Finish preparing the customer (up to the attachment
of the towel-turban) before setting the Main Unit.
1. Setting the Main Unit behind the customer.
Loosen the Height Adjustment Knob on the Main
Unit to move the Nape Bar up or down so that it
touches the nape of the customerís neck (the center
part of the back of the turban).
Move the Main Unit to behind the customer.
Towel-Turban
Height Adjustment
Knob
Turban Rear
Center Section
2. Open the upper cover, and lower the Hood
while checking the customerís position.
Fitting the Face Guard
1. Adjust the Face Guard from the
inside of the Hood so that it comes
to a position above the turban.
Adjust it so that insertion is done
from the nape of the neck side to
prevent the Face Guard from
covering the customerís face.
Face Guard
Turban
2. Tighten the crossed strap
(resin cord side) from the
inside of the Hood and fit
the Face Guard.
Fastener
*Tighten the Face Guard so that it will rest on the
top of the Towel-Turban (above the dotted line).
