Moving the Chair to Preset Positions
Although the setting positions of the preset switches are previously set, you can change to the
positions to match your needs and preferences.
21
Adjusting preset positions
1
Move the chair to the desired seat, backrest and legrest positions, and turn the
power switch off.
2
While pressing the preset switch (any of P1 to P3) for which you want to set these
positions, turn on the power switch.
3
Continue to press and hold the preset switch for approximately three seconds.
An electronic beep is emitted to indicate that the position has been set.
4
Return the chair to the position for getting in/out of chair by using the auto-return
switch, and use the preset switch for which you have changed the setting to make
sure that the chair moves to the position you have set.
Preset switches (P1 to P3)
Power switch
Control panel (Right)
Set the positions of the preset function with a person sitting in the chair.
The chair is equipped with a shockless device. Accordingly, the set positions vary slightly when a
person sits in the chair if position setting is performed without a person sitting in the chair.
