Assembly steps:
2
■
Assembling the Care Dry G stand
■
Assembling the Care Dry G main unit
(1) Loosely screw the height-adjustment pipe to
the four-legged stand.
(2) Place the weight and align the
height-adjustment pipe.
(3) Fully tighten the screws to fasten the
height-adjustment pipe to the four-legged
stand.
(5) Insert the upper main unit into the
height-adjustment pipe.
(6) Screw the upper main unit onto the
height-adjustment pipe.
(8) Assembly is completed. (Perform
an operation check.)
(4) Attach the stand cover.
(7) Connect the power cord.