■
Before letting a customer sit in the chair
F
B
Auto-return switch
■
When moving the seat up or down with a customer sitting in the chair
1
Moving the seat up
F
B
SEAT switch (upper side)
2
Moving the seat down
Step on the lower side of the SEAT switch on the foot control to move the seat down.
While you are holding it down, the seat will keep going down.
F
B
SEAT switch (lower side)
When you want to have a customer lie face down on the chair, make sure that the seat is at the lowest position and the upper
part of the chair is completely flat before having the customer lie on it. then, move the seat up. For how to make the chair flat,
see the “when having a customer lie flat” section on page 12.
Support arm
Legrest
Footrest
Backrest
Hold down the auto-return switch on the foot control for at least 1 sec. to
return the chair to the initial position.
Step on the upper side of the SEAT switch on the foot control to move the seat up.
While you are holding it down, the seat will keep rising.
●
Before moving the seat up or down, make sure that no body parts are placed in the openings
around the chair or the footrest. The upper part of the chair is very heavy, and the support arm is
under great force. If you pinch your body part in one of the openings, you may be seriously
injured.
●
When the seat is up, do not change the customer’s posture. The customer may fall and be
injured.
●
the backrest. Do not apply an unnecessarily heavy load on them. The chair may tip over or break.
The legrest and the backrest have a load capacity of 60 kg.
●
Be attentive to the customer when he/she
places his/her foot on or off the footrest,
which sags slightly.
CAUTION
WARNING
11
Summary of Contents for ESTHE PLACE
Page 22: ...NOTE...
Page 23: ...NOTE...