background image

Warning and Caution for Safety

 

Safety precautions

 Use an unshared socket.

 Make sure that the power cord and 

the power plug are not damaged.

 

parts away from the moving parts and 

Keep fingers, hands and any other body

Insert the power plug firmly.

around the parts of the product.

Body parts may be pinched, causing injury.

 When not in use, unplug the product.

 Hold the power plug when pulling it from 

the socket.

 Ensure an earth connection.

 Do not wash this product with water.

 Never allow anyone other than service 

technicians to disassemble or repair this 

product.

 Do not connect the earth wire to any of 

  

the following:

Severity and urgency level of harm and damage

Indicates that inappropriate use of the product in violation of the warning may result 
in death or serious injury.

Indicates that inappropriate use of the product in violation of the caution may result 
in mild injury or property damage.

Use  a  socket  that  matches  this  product’s  rated  voltage  and 
current and is equipped with an earth terminal. Do not plug any 
other electrical devices into the same socket with this product.

Insert  the  power  plug  fully  until  its  base  touches  the  socket. 
Otherwise, a short circuit or heat generation may cause fire. 

Do not pull the power cord to disconnect the power plug from the 
socket. Hold the power plug instead when disconnecting it from 
the socket.
Pulling the power cord from the socket will damage the power 

This product is an electrical device. Do not wash it with water. 
Failure or an electric shock may result.

 Water pipe

Most water pipes are made of rigid plastic and do not provide 
a complete earth connection.

 Gas pipe

 Lightning rod or telephone line

Lightning strikes may cause danger.

result.

When not in use, turn off the power switch and disconnect the
power plug from the socket.
Otherwise, accidental operation may result in unexpected harm,
or deteriorated insulation may cause electric leakage, resulting in
fire. 

Without an earth connection, an electric shock may occur in the 
event of a fault in the product or electric leakage.
For earth wire installation, ask a professional electrician.

During the disassembly or repair work, there is risk of an electric 

abnormal  operation.  Never  attempt  to  repair  or  modify  the 
product by yourself, as this poses great danger.

Before use

Be sure to carefully read through the safety precautions before use so that you can operate the product
correctly.

Purpose and classification

These precautions are intended to ensure safe use of the product and protect you and others from
injury or damage.

Safety precautions are classified here by the severity and urgency level of harm and damage that may

be caused by inappropriate use of the product. Be sure to follow the precautions because they are all
related to your safety.

CAUTION

WARNING

WARNING

Classification

2

Summary of Contents for ESTHE PLACE

























Reviews: