Takara Belmont ESTHE PLACE, Operation Manual

●

 Keep the chair operating range clear of 

any obstacles.

●

 Do not sit on the backrest.

●

 Avoid any environment that is subject to 

electromagnetic disturbance.

●

 Installation precautions

●

 Before and while changing preset or 

auto-return positions

●

 After changing preset or auto-return 

positions

●

 Sit only on the spot that is designed for 

that purpose.

●

 When reclining/raising the backrest

●

 Do not apply an excess load on any parts of the chair.

Before  and  while  operating  the  chair,  make  extra  sure  that  its 
operating range (seat moving up/down, backrest rising/reclining, 
legrest  rising/lowering,  and  chair  rotation)  and  its  proximity  are 
clear  of  human  bodies  or  any  other  obstacles.  Otherwise,  the 
chair may pinch body parts or objects, causing injury or property 
damage.

The chair may tip over, causing injury or breakage.

Make extra sure that the chair’s operating range and its proximity 
are clear of human bodies or any other obstacles. Otherwise, the 
chair may pinch body parts or objects, causing injury or property 
damage.

This  product  may  not  work  properly  in  an  environment  that  is 
subject to electromagnetic disturbance. Do not install it near any 
devices that generate electromagnetic waves, such as commu-
nication equipment or elevators.
Near  this  product,  do  not  use  mobile  phones  or  any  other 
devices that generate electromagnetic waves.

●

 Entrust the installation of this product to specialised personnel 

●

●

The chair may tip over.

●

 Before installing the chair, be sure to attach rubber plates to 

the underside of the base to prevent the chair from wobbling.

Make extra sure that the chair’s operating range and its proximity 
are clear of human bodies or any other obstacles.
Otherwise, the chair may pinch body parts or objects, causing 
injury or property damage.

When the backrest is fully reclined, never sit on the headrest, the 
height-adjustable service tables, or the edge of the seat. Do not 
apply  an  unnecessarily  heavy  load.  The  chair  may  tip  over  or 
break.

Make  sure  that  the  gap  between  the  backrest  and  the  seat  is 

reclining/raising the backrest. Otherwise, injury may occur due to 
pinching.

Never climb onto the legrest or the backrest. Do not apply an unnecessarily heavy load on them. The chair may tip over or break. The 

●

 Precations for the build-in sockets

• Be sure to fully insert the power plug of the device being used into the built-in socket until reaching the base of the plug. Failure to
   fully insert the plug or similar loose connection can result in a short circuit or heat generation that causes a fire.
• If the connection becomes loose, immediately stop using the equipment attached to the built-in socket and unplug the equipment
   from the built-in socket. 
   Contact your nearest dealer or Takara Belmont as soon as possible for inspection or replacement parts.
• Remove the power plug of a device from the built-in socket when not using it.
• If any water gets on a built-in socket, immediately turn off the chair power switch, remove the plug, and wipe away the water.
   Additionally, if a substantial amount of water gets inside a built-in socket, immediately remove the plug and contact your nearest
   dealer or Takara Belmont.
• Do not touch a built-in socket with a wet hand.
• If needed, use a suitable conversion adapter as 12A (AC110V) or 7A (AC220/230V) or higher.
• When a conversion adapter is used, make sure that it is firmly plugged into the built-in socket.
   Loose connection can make the adapter heated up and lead to fire.

legrest and the backrest have a load capacity of 60 kg.
Do not apply an unnecessarily heavy load on the headrest or the height-adjustable service tables. They have a load capacity of 10 kg.

WARNING

3