background image

1

If RS SWING is installed after ignoring this symbol, "there is the risk of light or moderate injury or physical

damage".

 The precautions listed here are to ensure that RS SWING can be installed safely, and to prevent any 

danger or risk to the person installing RS SWING or those around them. All of these precautions are

important for safety. Takara Belmont is not responsible for any damage or risk to the person installing RS SWING

or those around them due to accidents if RS SWING is installed without adhering to the precautions.

To the customers

• Customers must ask proffessional to install RS SWING.
• Customers must not install RS SWING by themselves.
• Customers must store these instructions in

a safe place so as not to lose them.

To the installer

• The instructions should be thoroughly read

and understood before installation to ensure

that RS SWING is installed correctly.

• After installation, give these instructions to the customer.

* The actual shape of RS SWING and the images and

dimensions listed in these instructions may be modified

and are subject to change without notice.

Caution

 

Contents

2

3

4

5

8

12

13

14

January 2016

Varsion 1

Before installation

Usage conditions

Content of packaging

Installation of  Main Unit

Assembled

Overall Layout Diagram

Unit fixing position and Plumbing Layout

After installation

RS SWING

Installation Instructions

■ 

AY-P004

P011 / S033X

Summary of Contents for RS

















Reviews: