16
Shower Hose Slot
Drain Cap
Drain Cap
■
To fill up basin with hot water
The drain is closed.
The drain is open.
Clockwise Direction
Anti-clockwise Direction
<Filling the basin>
<Discharging the water>
To fill the basin with water, rotate the drain cap in
the clockwise direction to close the drain outlet.
The amount of water should be below the level
shown by the dotted line in the illustration below
(just below the shower hose slot).
When water accumulates and exceeds the dotted
line, water may overflow from the shower hose
slot.
To drain the water, rotate the drain cap in the
anticlockwise direction to open the drain outlet.
The amount of accumulated hot water may decrease slightly in an amount that does not affect use. A small amount of
water may flow out, but does not affect its convenient use. If the decreasing level is significant, the gasket of the
drain cap may have deteriorated or become worn, so replace the drain cap. (available at additional cost)
Note
・
The amount of water should be below the designated maximum water
level. (See right figure.)
・
Do not leave the shower head in the water to ensure that water doesn't
leak out the shower hose slot.
Water may flow back into the water pipe which could cause issues.
・
When the drainage speed slows, there is a possibility that dust and dirt
may have clogged the drainpipe.
・
The drain cap must be detached from the drain outlet when the product is
not in use. If the drain cap is not detached, the drain may accidentally
close, and the water may overflow from the failure to notice water
dripping, thus resulting in water leaks.
Caution
Designated maximum
water level