![background image](http://html2.mh-extra.com/html/takara-belmont/yume-swing/yume-swing_operating-manual_3339309003.webp)
Adjust the water temperature while
checking the temperature by hand.
When adjusting the temperature of the water,
reduce the volume of water, point the shower head
away from the client and check the temperature by
hand. Take care when doing so, as hot water may
come out of the shower head.
Install on a stable area.
Install the main unit on a flat, firm floor, and fix it
securely. Failure to follow this instruction may
cause the main unit to fall over.
Do not lean on the basin.
Leaning on the basin while shampooing etc., may
cause the basin to fall over or rotation arm to
move, leading to injury.
Also, coloring dyes on the neck cushion or basin
may stain the user’s clothes.
Do not use hot water (boiling water) of
60°C or higher.
Using hot water of 60°C or higher may deform or
damage the basin, shower head and tap, etc.
CAUTION
Hot Water
Return the thermostatic control knob to
an appropriate position after using hot
water.
• Return the thermostatic control knob to an
appropriate position after using hot water at high
temperature. Continuing to use the hot water with
the knob in the hot temperature position may
cause burns.
• Using other equipment that share the same
water/hot water supply source at the same time
may cause unstable water temperature. If
multiple equipment are to be used, turn the
thermostatic control knob slowly to adjust the
water temperature.
Warning
3