Getting started
1.
Power supply
Ethernet socket
Cable compartment
USB connection
ports
2.
Connectivity
This is a Multi-Comms terminal, meaning you can
connect via WiFi or Bluetooth through the Ethernet.
It will start with WiFi as first preference. If that is
unavailable, it will move to the Bluetooth/Ethernet
connection. All of this operates seamlessly in the
background and will not need any intervention beyond
the initial set up!
Our easy guide will help you get up and running in no time.
We’re excited to have you on board.
2
1.
Getting started
2.
Connectivity
3.
Setup
4.
How to install your terminal
We'll cover:
Set up your base unit in a convenient location close to a
power source and an Ethernet socket.
To connect the power lead to your base, remove the back
panel of the terminal, as shown in the diagram opposite.
Then connect the right-angle adaptor and push it firmly
into the socket.
First, connect one end of your Ethernet cable to the
Ethernet socket or router and plug the other end into the
socket located on the rear of your base unit, as shown in
the image below.
a. WiFi setup
b. Blutooth base setup
