Takeuchi TB210R, Workshop Manual

SAFETY

SAFETY PRECAUTIONS

1

1

SAFETY PRECAUTIONS

1B0BF00

SAFETY PRECAUTIONS

Observe all safety rules

• Operation, inspection and maintenance of this ma-

chine must be performed only by a trained and quali-
fied person.

• All rules, regulations, precautions and safety proce-

dures must be understood and followed when per-
forming operation, inspection and maintenance of this
machine.

• Do not perform any operation, inspection or mainte-

nance of this machine when under the influence of al-
cohol, drugs, medication, fatigue or insufficient sleep.

Wear safe clothing and protective gear

• Do not wear loose clothing or any accessory that can

catch on the controls or the moving parts of the ma-
chine.

• Do not wear clothing stained with oil or grease that can

easily catch fire.

• Wear protective gear such as helmet, safety shoes,

protective goggles, respirator, gloves and earmuffs,
as appropriate, depending on the work involved. Es-
pecially make sure to wear protective eye-wear and
mask when working with a grinding/polishing/sanding
machine, hammer or compressed air, as metal frag-
ments or other objects could scatter in such an envi-
ronment.

• Wear hearing protectors when operating the machine.

Loud and prolonged noise can damage or destroy
your hearing.

Install an extinguisher and a first aid kit

• Install an extinguisher to fight a fire, and learn how to

use it.

• Prepare a first aid kit and keep it at a designated

place.

• Decide on the procedures to be used in case of fire or

other hazards.

• Decide on and take note of the contact(s) in case of

emergency.

Place a “Do not operate” alert sign

Serious injury or death may result if an unauthorized per-
son starts the engine or touches the controls during in-
spection or maintenance.
• Before performing maintenance, stop the engine, re-

move the key and store it in a safe place.

• Prominently display a “Do not operate” alert sign on

places such as the starter switch and the control lever.
Place another sign outside of the machine as neces-
sary.

Use the correct tools

Do not use damaged or weakened tools or tools de-
signed for other purposes. Use only the correct tools for
the work involved.

1BAA01Z 

1BAA02Z 

1BAA03Z