7 Maintenance and Care
74
TW9
7.8.4 Inspection plan
Work to be carried out by trained specialist dealer personnel:
O = Checking, maintenance
X = Replace
Operating hours
min
2x
min
1x
Perform work with machine at operating temperature
after
100
every
500
every
1000
every
2000
year-
ly
year-
ly
Chapter
1
Check machine for presence of machine-specific
operating instructions
O
O
--
2
Change the engine oil
X
X
7.9.1
3
Change the engine oil filter
X
X
7.9.2
4
Drain water from the fuel tank
O
O
O
7.9.4
5
Replace the fuel filter
X
X
7.9.4
6
Clean fuel pump, sieve filter
O
7.9.4
7
Check air intake
O
O
7.9.5
8
Replace main air filter cartridge
according to the service
indicator
X
7.9.5
9
Replace the air filter safety cartridge
as required
1)
7.9.5
10
Clean cooling fins on hydraulic oil cooler
O
O
O
7.9.10
Machine damage
due to strong accumulation of dust.
•
Shorten the cleaning intervals!
11
Clean cooling fins of water cooler (combined cooler)
O
O
O
7.9.3
Machine damage
due to strong accumulation of dust.
•
Shorten the cleaning intervals!
12
Check antifreeze level in coolant
O
7.9.3
13
Change coolant
as required
1)
7.9.3
14
Check V-belt tension
O
O
7.9.6
15
Check engine mount and pump attachment
O
O
--
16
Check engine speed setting, upper and lower idle
speeds
O
O
--
17
Check valve lash of engine and adjust if necessary
1x every 500 OH and as required
--
18
Check injection valves
O
--
19
Check or replace the fuel leakage oil line
O
X
1)
7.9.4
20
Replace toothed belt
3)
--
21
Check crankcase breather in valve cover
O
--
22
Check acid level and battery connections
O
O
7.9.17
23
Check condition of tires, tire pressure and fastening
of wheel nuts
O
O
7.9.14
24
Check fastening of axles and propeller shaft
O
O
--
25
Check bearing bushings and bolts of work
equipment and replace if necessary
O
O
--
26
Check bushings and bolts of the articulation and the
articulated steering and replace if necessary
O
O
--
Summary of Contents for TW9
