7
/
17
(ver.0.4)
8. Serial communication protocol
Operation under the RS232C communication
(1)
Selection of output bit format 8/10 bit
(2)
SYNC system switching
AUTO
When EXT SYNC is not designated, it automatically switches to INT SYNC.
EXT.SYNC EXT. SYNC operation only
INT. SYNC INT. SYNC operation only
※SYNC period is determined from the following equation.
SYNC period = Minimum n × a
Where
Internal sync(sync=2) n= expt (exposure time)
a= 12.8μsec ….. TL-5150UCL
10.24μsec …..
(3) Exposure control system switching (Refer to the time chart on P.11)
Line period exposure Exposure during periodic time
Fixed time exposure Exposure during pre-set time
Pulse width exposure Exposure during the pulse width of EXT.SYNC
(4) GAIN switching
Selection of GAIN position 1,2,3,
…………8
×
Selection of GAIN position for each channel ODD/EVEN adjustment
(5) Adjustment of OFFSET
OFFSET adjustment for each channel (ODD/EVEN)
T
-
2
0
4
8
U
C
L
T
L
-
4
0
9
6
U
C
L
T
L
-
7
4
0
0
U
C
L
T
L
TL-1024UCL
TL-2048UCL
TL-4096UCL
TL-7400UCL
TL-7400RCL
TL-7450UCL
