Welcome to use TAKSTAR portable multimedia amplifier, this product is specially designed for
teaching, promotion and tour guiding. Adopts PO² digital power synthetic technology provides
long operating time and high output power, it is an ideal choice for teaching and promotion.
Please read this manual detailedly before using to exert the best performance.
Caution
Applications
E170M
Features
· Adopts PO² digital power synthetic technology, high output power up to 8W
· Rare earth material speaker features light weight, excellent sound quality and loud output
volume
· With music play and single cycle function, supports the multimedia audio files play of U disk/
TF card
· LOW-THD adaptive technology prevents sound distortion under high power output
· Built-in high capacity lithium-ion battery and MCU intelligent recharging management
system for secure recharge/discharge, 5 hours fast recharging time and long play time up to
8-12 hours
· Durable ABS housing, compact and stylish design
· Multiple wearing choices for convenient use
Control Panel Function Diagram
①
Power Button: turn the button to the left till one “di” sound is heard, it means the amplifier
is turned on and the power indicator
②
lights up. Continue rotating the button to the left,
the more the sound is louder, conversely rotate the button, the more the sound is lower, till
it turns off
②
Power Indicator: the indicator lights green when it normally turns on, the indicator lights red
when the amplifier under the low battery capacity
③
Power Adaptor Input Port: connect the DC 5V power supply to this port for recharging
④
Recharging Indicator: the indicator lights red when the amplifier is charging, it turns to green
when the amplifier is fully charged
⑤
Last Song Button: Gently tune the button to the left for last song, press and tune the button
to the left to reduce the music volume
⑥
Play/Pause Button: press this button to play / pause the music
⑦
Next Song Button: Gently tune the button to the right for next song, press and tune the
button to the right to increase the music volume
⑧
Cycle Playback Button: press the button for setting / cancel the cycle playback of the current
play song
⑨
Cycle Playback Indicator: the indicator lights up when press the cycle playback button
⑧
the
indicator keeps on when the amplifier under the single song loop playback mode
⑩
MIC IN Port: plug the headworn microphone into this port for sound amplifying mode
⑪
TF Card Slot: plug in the TF card according to the marked direction till a “da” sound is heard,
it means it is locked in place; to take out the card, press the TF card downward till a “da”
sound is heard, it will spring out automatically
⑫
USB Port: supports for large capacity USB disk
⑬
Shoulder Hanging Buckle
⑭
Battery Compartment: Built-in 1pc high capacity lithium-ion battery
1. Please do not input the external sound source such as DVD/MP3 from MIC port, avoid large
sound level cause distortion
2. For best performance, please point the capsule of the headworn microphone 1-2cm for
sound, avoid incorrect pick up direction cause howling
3. Non-professional technician is not allowed to disassemble and modify or repair the device.
Please contact your local agent if you need service or have any question
4. Please fully charge the battery to assure its service life if the device will not be used for a
long time or the battery voltage is low
5. Do not expose the battery or battery pack to extremely hot environment such as sunlight or
fire etc
6. Caution: improper replacement of battery or battery pack is likely to cause an explosion, user
can only use the same or equivalent type of battery to replace the original one and should
pay attention to the battery polarity
7. Warning: it's forbidden to connect the battery in reverse, to short circuit or hit the battery
violently, to use the battery as a child's toy. Do not use other charging equipment to charge
the battery of this device, do not use the device to charge other battery, improper use may
cause a risk of explosion. Do not charge a non-rechargeable battery
8. Put the device and its accessories in a dry and ventilated place, keep them from rain, water,
avoid falling down heavily and don't cover the ventilation hole
9. Put the used battery in a designated trash can or send it back to the manufacturer to protect
the environment
10. Keep the power adapter or charger handy, unplug it from the power socket if you are not
going to use it for a long time
Specification
· Frequency Response: 80Hz-12kHz
· Rated Output Power: 6W
· Max. Output Power: 8W
· Speaker Impedance: 4
Ω
∙
Operating Voltage: 3.7V
∙ Battery Specification: 3.7V/2000mAh lithium-ion battery
∙ Power Adaptor Specification: DC 5V 600-750mA
∙ USB Output: DC 5V 150mA
∙ Playtime: 8-12hrs
∙ Recharging Time: 4-6hrs
∙ USB disk/ TF Card: Max. 16G
Product Contents
Lithium-ion Battery 1pc Shoulder Strap 1pc User Manual 1pc
Speaker 1pc
Power Adaptor 1pc
(Free Part)
HM-700 Headworn
Microphone 1pc
· Teaching, tour guide, promotion, morning exercise
Operating Instruction
1. Install the battery according to the correct polarity into the battery compartment
2. Correctly wear the headworn microphone on the head and adjust the pick up angle+
3. Plug the
Φ
3.5mm connector of the microphone into the microphone input port
4. Turn on the amplifier, the power indicator lights up, adjust the volume to an appropriate level
5. If the power indicator lights red during use, it means the battery capacity is low and need
recharge timely
Designed & Manufactured by:
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou Guangdong, 516121China
International Sales:
Tel: +86 752 6383644 Email: sales@takstar.com Website: www.takstar.com
14
11
12
13
DC 5V 150mA
DC 5V 600mA
The device and its accessories can
only be used safely in the areas
below an altitude of 2000 meters
2000 m
The device and its accessories
can only be used safely in
non-tropical regions
Amplifier (Digital Player)
