Takstar E20W, User Manual

Operation Instructions

14

④ [+] button: press to increase mic volume. In pairing mode, press or long 

press to gradually/rapidly change to previous channels.

⑤ [-] button: press to decrease mic volume. In pairing mode, press or long 

press to gradually/rapidly change to next channels.

⑥ Power indicator: light's off when the power is off and not charging; lights 

up solid blue when powered on and power is sufficient; flashes blue if low 

power; illuminates red while charging and goes off when fully charged.

⑦ LED display: display info such as working channel, mic volume and power 

setting.

⑧ Working channel/mic volume: display the current operating channel by 

default; 40 working channels in total, “01-40”. Volume level is displayed 

for 3s when you press volume [+]/[-] button, 9 levels in total, “U1-U9”. 

LED display goes off automatically after 10s without any operation.

⑨ High/Low power switch: press both [M] and [-] buttons at the same time to 

switch to low power, LED display shows E0; or press both [M] and [+] to 

switch to high power, LED display shows E1. (Use distance is around 10m 

when set to low power, or around 40m when set to high power)

I. How to Use

Headset Microphone:

1. Pairing Method

①

 First, power off both the headset mic and the amplifier. Next, power up the 

headset mic, long press mic [M] button for 3s until its LED display shows a 

circle. Then, immediately power up the amplifier, wait until the headset mic's 

LED circle changes into a static number. Talk towards the mic to test if your 

WIRELESS AMPLIFIER

E20W