Takstar E20W, User Manual

Safety Instructions

1. Please check if the power of the connected equipment matches with that 

of this product before operation. Adjust the volume to proper level during 

operation. Do not operate at over-power or high-volume level for extended 

time to avoid product malfunction.

2. If there is any abnormality during use (e.g., smoke, strange odor), please 

kill the power switch and unplug from power source, then send the product 

to the local after-sales service for repair.

3. Power adapter used, if any, should be approved by CCC certification or 

similar standards and comply with the power supply requirements.

4. Keep this product and its accessories in a dry and ventilated area. Do not 

store in a humid or dusty area for extended time. Keep away from fire, rain, 

liquid intrusion, bumping, throwing, vibrating, or from blocking any 

ventilation openings, to prevent malfunction.

5. The product must, when installed on walls or ceilings, be fixed firmly in 

place at adequate strength to prevent from falling.

To avoid electric shock, overheat, fire, radiation, explosion, mechanical 

risk and injury or property loss due to improper use, please read and 

observe the following items before use:

Devices such as cell phones, laptops, tablets, and iPads can play music via 

Bluetooth thereafter.

3. The next time you switch to Bluetooth mode, the amplifier will 

automatically connect to the previously paired device, signaled by a voice 

prompt “Bluetooth connected”. When Bluetooth is connected, press [M] to 

disconnect Bluetooth and switch to the next work mode.

16

WIRELESS AMPLIFIER

E20W