Takstar E261W, User Manual

Open the tail cover of the microphone counterclockwise, install 2 AA batteries according 
to the positive and negative polarity marked on the battery compartment (pay attention 
not to install the batteries reversely), and tighten the tail cover of the microphone 
clockwise as shown below.

Tip: When the battery indicator on the microphone display flashes, it means that the 

batteries are running low. Please replace them in time.

Press the M button repeatedly to turn on or off the wireless playing function. The wireless 
playing function is off by default when the amplifier is turned on. When the amplifier is 
used for the first time, it needs to connect to a mobile phone or wireless playing 
equipment. The steps are as follow.
1. Long press the power button to turn on the amplifier, and then press the "M" button.  
     The working indicator flashes red and blue alternately, indicating that it is in the state 
     of searching and matching.
2. Enter the "Settings" menu of the mobile phone, find the option of wireless playing 
     function, and turn on the wireless playing function of the mobile phone. After searching 
     for "TAKSTAR E261W", tap "TAKSTAR E261W" to connect, and the working indicator will 
     be on again, indicating that the connection is successful.

The frequency has been matched by default when the product leaves the factory. It will 
automatically connect when turned on without frequency matching. In case of signal 
interference, you can try frequency matching again or frequency conversion according to 
the following methods.

Portable wireless amplifier

18

Instructions for use

Battery installation 

E261W

Wireless playing matching

Frequency matching methods