Takstar E500W, User Manual

 Wireless Amplifier

E500W

17

Operation Instructions

A. Pairing Method

The products are paired by factory default and will automatically connect to each 

other once powered on. No extra pairing is required. If there is signal interference, 

follow the below steps to re-pair or change frequency:

Handheld Microphone:

1. Pairing Method

①

Power up both mics by long pressing their power buttons, their LED indicator 

should light up green. Then press their power buttons twice to enter pairing mode, 

indicated by flashing green LED indicator. Meanwhile, immediately power up the 

amplifier, wait until the flashing LED on handheld mic turns solid green to finish 

pairing. You should be able to hear voice amplification when talking to the mic.

②

 If there is no sound when you talk to the handheld mic, that means the pairing 

is not successful, please retry the above steps to re-pair.

2. Changing Frequency

①

 Power up both the amplifier and handheld mic. After successfully paired, press 

the power button on the mic once to change frequency. If successful, the green 

indicator should flash for 1s before resuming solid green.

Note: Wireless handheld mic A & B each has 20 adjustable frequency channels. 

Mic A: CH01-CH02; Mic B: CH21-CH40.

Headset Microphone:

1. Pairing Method

①

First, power off both the headset mic and the amplifier. Next, power up 

the headset mic, long press mic [M] button for 3s until its LED display shows 

a circle. Then, immediately power up the amplifier, wait until the headset 

mic's LED circle changes into a static number. Talk towards the mic to test if 

your voice is amplified and if pairing is successful.