Takstar ESC-15A, User Manual

"Remote" will be displayed during online control, and 
other settings cannot be made at this time. "Mute" will 
be displayed when the device is muted by the 
computer software. When the device enters the sleep 
state, "Idle" will be displayed. When there are the 
above three states, the standard screen will not be 
displayed.

Turn the knob to adjust the standby time. When no input 
signal is detected during the standby time, it will enter 
the sleep state. The standby time ranges from 0 to 30 
minutes. When set to 0, it will not enter the sleep state, 
and the power amplifier will be working all the time. 
When the knob is pressed, the standby time is stored 
and the "Standard Screen" is entered.

5

. 

Standby Mode Selection

Idle

Mode

1

Closed

Idle

Mode

0

Closed

Output

Stage

Output

Stage

And

Power

6

. 

Standby Time Selection

Idle timeout 

00    Minute

7. 

Other States

Idle

Remote

Mute

ESC-15A

Active Subwoofer

Turn the knob to select the standby mode. Mode 0: Turn 
off the power amplifier output stage.

Mode 1: Turn off the power amplifier output stage and 
the main power supply. 3004 does not support mode 1, 
and it may keep restarting after mode 1 is selected. 
When the knob is pressed, the standby mode is stored 
and the "Standby Time Selection" is entered.