4
3
5
6
DC socket: plug one side of the USB power cable into this socket, and the
other side of the USB power cable into USB socket of computer(or mains
supply by adding the power adaptor to the USB cable) for recharging
the battery
Audio input/output socket: when the headphone is working at wireless
status, the audio signal can be connected to other headphones or other
audio equipment for sharing the music with your friends by plugging an
audio cable into the audio output socket; when the wireless function is
turned off, plug in audio playing equipment such as IPOD, MP3 or
computer into this socket with an audio cable, the headphone will be
used as a common wired headphone
ID button: plug the transmitter into USB socket of computer, then press
the ID button on headphones, the LED indicator on the left earcup will
flicker every 150ms. Make sure that the distance between the
transmitter and the headphones are within 50cm. When the LED
indicator lights green continuously, it means the frequency matching is
finished, the headphones can be used normally (The headphones and
transmitter in the same package are already matched during production,
no need to operate the frequency matching unless the headphone is
used together with a new transmitter, or the transmitter is used
together will a new headphone)
Previous song, next song and pause control knob: turn the knob to for
previous song; turn the knob to for next song, press the knob vertically
for playing or pause
Volume control: press VOL+ for in increasing the volume, press VOL- for
decreasing the volume
Adjustable headband
2.4G wireless transmitter: plug the transmitter into USB socket of
computer, the transmitter is at working status
ML 70DW headphones 1pc
2.4G wireless transmitter 1pc
Y-type audio cable 1pc
Power adaptor 1pc
USB power cable 1pc
USB extension cable 1pc
Portable bag 1pc
User manual 1pc
7
9
8
2
Standard Configuration
