Function Descriptions
XLR Port: used to connect to audio device such as audio interface and
mixer via XLR cable.
Operation Instructions
1. To connect the mic with XLR cable, align the XLR connector with the 3-pin
connector on mic, then insert fully until the XLR lock button locks in place.
2. Connect the other end of the XLR cable with audio device, e.g., mixer,
power amplifier, audio interface.
1
2
3
pin1 (ground)
pin2 (+)
pin3 (
-
)
Audio Interface - Rear
Audio Interface - Front
Male/Female XLR
Audio Cable
PC
USB Data Cable
3. Hold the mic by hand, or install it on a stand. For stand installation, first
fix the mic clamp onto the 3/8'' or 5/8'' standard-threaded connector on
the stand, then secure the mic onto the clamp as shown below:
4. Please turn the volume to the minimum on the audio device (e.g., audio
interface, mixer) before switching on the phantom power. Then gradually
increase the volume to an appropriate level. This helps to prevent the
speakers from being damaged by high sound pressure. Keep a proper
distance between the mic and the speakers to avoid feedback howling and
ensure audio quality.
5. Please speak towards the top of the mic grille while recording,
recommended at 5-10cm speak distance.
5-1
0cm
6. To disconnect the mic from XLR cable, press down the XLR lock button
and unplug the cable.
Professional Dynamic Microphone
Professional Dynamic Microphone
11
10
Summary of Contents for TA-68
Page 1: ...专业动圈麦克风 PROFESSIONAL DYNAMIC MICROPHONE ...
Page 10: ......