Takstar TS-8807PP, User Manual

TS-8807PP 

Wireless Microphone

Operation Instruction

①Before turning on the receiver, do not turn on the transmitter. Reduce the 
receiver volume, then press the receiver power switch for 3 seconds. When 
the receiver is powered on, LCD lights up and displays all characters and the 
receiving frequency. 
②Before turning on the transmitter, check RF and AF level on LCD. If there is 
interference, adjust to another channel to avoid the interference. 

Lock and unlock the system

Lock the system: refer to figure ① and press SET button for 3 seconds and it 
displays the interface (refer to figure ③). All the function buttons are locked 
(power switch excluded). 
Unclock: press SET button for 3 seconds for unlocking and it displays the 
interface (refer to figure ④).  

Frequency adjustment

1. Adjusting frequency manually
Refer to figure ①, shortly press “▲”and “▼”button to adjust the current 
operation frequency. When you adjust to the needed frequency, stop 
pressing and the frequency stops, then the frequency adjusting is successful.
Turn on the transmitter power switch. Point the transmitter IR window to 
the receiver IR window. Keep ACT with IR window in a straight line (distance 
range 10cm-50cm). At this time, press SET button, it displays matching
interface and then matching search information. When the matching is 
successful, it changes to frequency channel display interface. If matching is 
unsuccessful, press SET match till matching is successful.  

21