Takstar WDA-900, User Manual

产品介绍

Panel Function

07

①
②

③

④

㉒

㉓

㉔

㉕

㉖

㉗

㉘

㉙

⑤ ⑥ ⑦ ⑧ ⑨ ⑩

 ⑪　⑫ ⑬ ⑭ ⑮

⑯

⑰

⑱

⑲

⑳

㉑

①LCD: it displays the amplifier operation mode and status. 
②SD card port: insert SD card into this port, and then the active speaker cabinet plays the songs
 in the card. 
③USB interface: insert USB stick into this interface, and then the active speaker cabinet plays 
the songs in the USB stick. 
④Power switch: it turns on/off the speaker cabinet. 
⑤Music pause/play button: press this button to pause or play music. 
⑥Mode switching: press the button shortly to switch Bluetooth or line in or media playing mode. 
Keep pressing the button to turn on/off original sound function. 
⑦Repeat: press this button to switch the playing mode of repeat single song or all songs. 
⑧Previous song: press this button to play the previous song.      
⑨Next song: press this button to play the next song. 
⑩Recording function: insert USB stick or SD card. Press this button and speaker or sing to the 
microphone, and the speaking or singing content will be recorded in USB stick or SD card.
Press this button again to stop recording. Insert USB stick or SD card again to play the recorded
content.
⑪Antenna A connector: connect with antenna to promote signal receiving. 
⑫Wireless microphone A signal LED: when wireless microphone A is connected, this LED lights up. 
⑬Wireless microphone A volume knob;
⑭Wireless microphone B signal LED: when wireless microphone B is connected, this LED lights up.
⑮Wireless microphone B volume knob;
⑯Antenna B connector: connect with antenna to promote signal receiving.
⑰Wired microphone connector

主机型号：WDA-900
功放类型：D类
额定功率：80W
低音：10英寸35芯120磁4Ω
高音：25芯 80磁4Ω 
频率响应：80Hz-15KHz
电源电压：AC 100V-240V /50Hz-60Hz 
内置电池：12V/9Ah可充电铅酸电池
工作时间：3-6小时
充电时间：3-5小时

标准配置：

WDA-900音箱×1                     遥控器×1
UHF无线麦克风×2                 AC电源线×1
AA电池×4                                  AAA电池×2
UHF天线×2                              说明书×1