Assembly instructions
Assembly
Version 1.0
Rotary indexer TMF
21 / 35
5.2.2
Attachment with flange plate
Mounting the flange plate on the complete drive
Fig. 11: Mounting the flange plate on the complete drive
1
Complete drive
2
Flange plate
3
Cylinder head screw EN ISO 4762
with lock washer, Type S (8x)
4
Assembly screw (2x)
Mount the flange plate on the complete drive as follows:
1. Use the assembly screws (4) to align and fix the flange plate (2) on the complete drive (1).
2. Fix the flange plate (2) with six hexagon socket head cap screws (3). Tighten the screws to the specified torque.
3. Undo and remove the assembly screws (4).
4. Screw in the remaining two hexagon socket head cap screws (3). Tighten the screws to the specified torque.
The complete drive can be mounted on the rotary indexer.
4
2
3
1