Assembly instructions
Annexes
Version 1.0
Rotary indexer TMF
35 / 35
11
Annexes
11.1
Content of the declaration of incorporation
(The original declaration of incorporation is included in the documentation)
Translation of the original declaration of incorporation
(in German) for partly completed machinery
(Machinery Directive 2006/42/EC, Annex II 1 B)
Manufacturer:
TAKTOMAT GmbH
Rudolf-Diesel-Straße 14
D-86554 Pöttmes
Description and identification of the partly completed machinery:
Your order No.:
-
Our order No.:
-
Product:
Rotary indexer
Type:
TMF
Serial number:
-
Commercial name:
Rotary indexer TMF
The manufacturer declares that the following essential requirements of the Machinery Directive
2006/42/EC have been applied and met:
1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.5.3, 1.5.4, 1.6.1, 1.6.4, 1.7.1, 1.7.4
Reference of the applied harmonised standards according to Article 7 Section 2:
EN ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
Furthermore, it is declared that the relevant technical documentation for this partly completed machinery has been
compiled according to Annex VII Part B. The manufacturer undertakes to transmit in electronic form relevant
information on the partly completed machinery within a reasonable time in response to a reasoned request by the
national authorities.
The partly completed machinery must not be put into service until the final machinery into which it is to
be incorporated has been declared to be in conformity with the provisions of the Machinery Directive.
Responsible for the
documentation:
TAKTOMAT GmbH
Address:
Rudolf-Diesel-Straße 14, D-86554 Pöttmes
