Model: EV8650
Machine Overview
TP05413002 Rev. 03
Page 5 of 62
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
2.4
Display Control Panel (Keypad)
Display / Control Panel Key Functions
1
LCD Display.
For note count / value and other functions.
2
Total.
Displays Sub Total of notes counted.
3
Mode Function.
For selecting Piece Count Mode or Value Mode
selection. Also used to enter Supervisor Mode.
4
Batch.
Set Batch size, press to step through the pre-set
batch sizes.
5
Start / Stop.
For Manual Start / Stop, if the Auto Start is not
selected also as a accept or enter key.
6
Auto.
Enables / disables automatic note start of note
counting.
7
Speed.
Setting the throughput speed, press for pre-set
speeds.
8
Det.
For selecting detectors.
9
Clear.
Clears display and some error messages.
10
Right Arrow Key
For scrolling through various mode options
11
Denom.
For selecting Denominational Values in d_Entr,
FdEn Modes, currency selection and exit key.
12
Left Arrow Key.
For scrolling through various mode options.
13
Numeric Keypad.
For note count / value and other functions.
1
2
5
6
7
3
8
4
9
12
10
11
13