Model: EV8650
Operating Instructions
TP05413002 Rev. 03
Page 13 of 62
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
3.2
Speed Adjustment
Select Pre-set Speeds
A range of pre-set speeds can be used for counting differing qualities of note paper.
Select the throughput speed by pressing the SPEED key.
Press this key and the current speed number will be displayed.
Press the SPEED key repeatedly to step through the available preset speeds.
e.g.
SPEEd 1
,
SPEEd 2
,
SPEEd 3
,
SPEEd 4
,
SPEEd 5
.
Where
SPEEd 1
is the slowest speed and
SPEEd 5
is the fastest.
Alternatively whilst the speed value is shown on the display, use the left or right arrow
keys to select required speed.
Press the START/STOP key to return to the count display or wait for the display to time
out.
Note: If you have selected
SPEEd 5
and have activated one of the detectors shown
below. The machine will automatically reduce the speed to
SPEEd 4
; this is done to
enhance detector performance:
PPd (
PPd
), IR / FoiL (
IR
/
FoiL
), LonG Edge (
LonG
), SMDS (
SnDS
), EPrES (
EPrES
)
1. Display
7. Speed
2. Total
8. Det
3. Mode
9. Clear
4. Batch
10. Right Arrow
5. Start / Stop
11. Denomination
6. Auto
12. Left Arrow
13.Numeric Keypad
1
2
5
6
7
3
8
4
9
12
10
11
13