Model: EV8650
Supervisor Functions
TP05413002 Rev. 03
Page 43 of 62
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
4.2.4
Print SEL (Automatic Print Function)
For setting automatic printing on removal of the notes.
Once in Supervisor Mode, use the Left and Right arrow keys to scroll through the
available Supervisor Functions.
Once
Print SEL
is displayed, press the START/STOP key to enter that function or press
the DENOM key to exit. Press DENOM to exit Supervisor Function completely.
Prtot
xxx will be shown, where xxx is an automatic print option. Use the arrow keys to
scroll through the list of automatic print options.
To exit the
Prtot
option, press the DENOM Key. To exit the Supervisor Functions
completely, press the DENOM key again. You will now be asked if you want to save the
settings.
Press the DENOM key to exit without saving.
Press the START/STOP key to save settings.
Note: The automatic Print Function will only operate when the
Print Pro
has been
selected in the Supervisor
CnS
Function. The transaction number is printed with the totals
and then incremented thereafter on each transaction. It can be re-set to zero in the
Printer set-up mode. (Not used in
dEntr
or Value dispense modes).
1. Display
7. Speed
2. Total
8. Det
3. Mode
9. Clear
4. Batch
10. Right Arrow
5. Start / Stop
11. Denomination
6. Auto
12. Left Arrow
13. Numeric Keypad
Option
Description
grb
Prints Grand Totals when both Hoppers are cleared
grs
Prints Grand Totals when Stacker is cleared
bun
Prints Bundle Totals when both Hoppers are cleared
StA
Prints Stack Totals when Stacker Hopper Is cleared
oFF
Auto-Print OFF (Print On Demand Will Be Active)
1
2
5
6
7
3
8
4
9
12
10
11
13