Please read the entire instruction manual before operating the Hotplate/Stirrer/
Hotplate-Stirrer.
WARNING!
DO NOT
use the Hotplate/Stirrer/Hotplate-Stirrer in a hazardous
atmosphere or with hazardous materials for which the unit was not designed.
Also, the user should be aware that the protection provided by the equipment
may be impaired if used with accessories not provided or recommended by the
manufacturer, or used in a manner not specified by the manufacturer.
Always operate unit on a level surface for best performance and maximum safety.
DO NOT
lift unit by the top plate.
CAUTION!
To avoid electrical shock, completely cut off power to the unit
by disconnecting the power cord from the unit or unplug from the wall outlet.
Disconnect unit from the power supply prior to maintenance and servicing.
Spills should be removed promptly after the unit has cooled down.
DO NOT
immerse the unit for cleaning. Alkalis spills, hydrofluoric acid or phosphoric
acid spills may damage the unit and lead to thermal failure.
CAUTION!
The top plate can reach 500°C,
DO NOT
touch the heated
surface. Use caution at all times. Keep the unit away from explosive vapors
and clear of papers, drapery and other flammable materials. Keep the power
cord away from the heater plate.
DO NOT
operate the unit at high temperatures without a vessel/sample on the
top plate.
WARNING!
Units are
NOT
explosion proof. Use caution when heating volatile
materials.
Replace the ceramic top immediately if damaged. A damaged top can break
in use.
DO NOT
operate the unit if it shows signs of electrical of mechanical damage.
Earth Ground - Protective Conductor Terminal
Alternating Current
s
Tandards
& r
egUlaTions
Troemner, LLC hereby declares under it’s sole responsibility that the construction of
this product conforms in accordance with the following standards:
Safety standards:
EN 60101-1
EN 61010-2-010
EN 61010-2-051
CAN/CSA C22.2 61010-1
CAN/CSA C22.2 61010-2-010
CAN/CSA C22.2 61010-2-051
UL 61010-1
EMC standards:
EN 61326-1
IEC 61000-4-4
EN 55022-B
IEC 61000-4-5
IEC 6100-3-2
IEC 61000-4-6
IEC 61000-3-3
IEC 61000-4-11
IEC 61000-4-3
Associated EU guidelines:
EMC directive 2004/108/EC
LVD directive 2006/95/EC
ROHS directive 2011/65/EU
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003.
3
s
afeTy
i
nsTrUCTions
s
afeTy
i
nsTrUCTions
ConT
’
d
